How do you lubricate a tripod ball head?
Use aerosol dry graphite for inside the legs, silicone grease for anything threaded, and aerosol teflon or motorcycle chain wax (not bicycle) for the ball head. This will prolong the life of your tripod by keeping friction and oxidation at bay.
Why is my tripod wobbly?
If the tripod head is wobbling on its connection to the legs, sometimes it’s an indicator that the head has spun loose on the large bolt that connects it to the tripod. Often there’s a setscrew accessible from below the tripod center column that can come loose and allow the tripod head to come loose.
How do you lubricate a tripod?
Before reassembling it’s a good idea to put just a little bit of dry lubricant, like powdered graphite, on the nylon shims and / or on the inside of the upper leg section. If you need to replace the lubricant on the threads, check your manufacturer’s website to see if they recommend a certain lubricant.
How do you counterbalance?
Counterbalancing is a technique used to deal with order effects when using a repeated measures design. With counterbalancing, the participant sample is divided in half, with one half completing the two conditions in one order and the other half completing the conditions in the reverse order.
How does a tripod fluid head work?
The accurate definition of a fluid head: A head, made for tripods and monopods, that contains a fluid chamber within its design, to dampen the sudden movements and vibrations of the camera, in order to get smooth video pans and smooth tracking.
What is Pan drag?
The Pan (Grab-and-Drag) command selects the Pan tool as the current tool. To change the center point of the image without changing the magnification, depress the left mouse button, drag the view to the desired location, then release the left mouse button to redraw the view at the new location.
How do you fix a tripod head?
Turn the head clockwise until it’s tight. Continue turning until you can’t tighten it anymore to lock it in place. Check under the head to make sure there’s no space between the head and tripod mount. The 2 parts should fit snugly together. If there’s any space, unscrew the head and reattach it.
How do you clean a tripod?
Use soap and water to clean every piece There’s no particular brand that we recommend – but do use dish soap, since it cuts through grease and won’t leave a residue. I use a soft scrubbing pad to clean each part, and an old toothbrush to get the threads in the tripod legs clean.
What is silicone grease made of?
Silicone grease, sometimes called dielectric grease, is a waterproof grease made by combining a silicone oil with a thickener. Most commonly, the silicone oil is polydimethylsiloxane (PDMS) and the thickener is amorphous fumed silica.